The inter­net with its vast col­lec­tion of other indi­vidu­als’ ideas is a great hunt­ing spot for those of us that wish to sup­ple­ment our own ideas with theirs. Device­Bond­age is one of my hunt­ing grounds. Not only do they put girls into most com­prom­ising situ­ations they also have a pleth­ora of ideas on how to do so. Steel pipes all of a sud­den become shackles and scaf­fold­ing clamps hold a girl fol­ded in half.

I am try­ing to build a dun­geon in the base­ment in pre­par­a­tion for a toy join­ing us and me spend­ing more time using and tor­tur­ing my slave.

I am using their ideas as a blue­print for mine, refin­ing them as I go along.
I have learned that I should build a wooden deck which is slightly raised, not only because it will make my slave less likely to cool out quickly, but also because such a floor allows for quick repos­i­tion­ing of hooks and other devices used to either lock her down or give sup­port to other contraptions.

I have suc­cess­fully tested a com­pound pul­ley sys­tem with thin steel lines that can eas­ily sup­port up to 200KG in load and attach to the wooden beams that hold up our liv­ing room floor.

Because my life was very hec­tic the last ten years and prob­ably due to the fact that I never really made a home I am not exactly over­loaded with tools. I am not the guy that can give you all the answers when it comes to tool­ing his gar­age.
To me that makes this pro­ject even more fun. I need to come up with cre­at­ive solu­tions to prob­lems that can usu­ally be solved with a tool very eas­ily.
Join­ing together steel or any such mater­ial is a good example.

Alu­minium, steel, iron and so forth are per­fect for build­ing struc­tures or traps that are hard to break and almost impossible to get out of. To make cre­at­ing my own devices easier I have recently stumbled across a cold weld product called JB Weld.  Find­ing such a product is very excit­ing to me, as it opens up a new world of pos­sib­il­it­ies. Finally I can eas­ily  join together metal objects in any form I can dream up, with little to no effort, cre­at­ing a fun and safe dun­geon for me to play in.

So far the pul­ley has been built and it has been proven to work, now all I need to do is make sure it is struc­tur­ally sound and can lift my slave off the ground. The next step will be to build a wooden plat­form, most likely in the same vicin­ity I placed the pul­ley at.  As a first step I will then most likely build a stool which is cut out in the middle and has an attach­ment for vari­ous toys so that someone sit­ting on it, would have that toy inser­ted into one of their holes.

My goal should be that the stool can be eas­ily attached to the wooden plat­form, most likely using wood screws. That would leave me with a sys­tem where the slave sits, with cunt or asscunt filled, feet bound to the stool, the stool screwed to the wooden plat­form and the arms cuffed and raised up using the pul­ley sys­tem.  That would of course leave the tits and upper body free for tor­ture and play.

If I can man­age to add a tilt mech­an­ism to the stool the pul­ley could be used to sup­port a tilted body, which would enable me to lower the mouth hole to an accept­able height for fuck­ing.  I am excit­ing about this little pro­ject of mine and if you have any ideas to share, then please do. I will aim to keep post­ing updates as the build­ing pro­gresses. Now back to the draw­ing board…