I had prom­ised an update on the BDSM cross and finally I have had a chance to fin­ish it. I will let you look at some pic­tures first and then add some explan­a­tion.
As men­tioned before I had to rein­force the cross to ensure that no motion will be trans­ferred to the main bracket as my slave tries to wiggle or move in her pre­dic­a­ment. I had to build the sup­port­ing beams myself as none of our hard­ware stores car­ried suit­able 90º steel brackets.

A view of you walk­ing around the cross, show­ing the main beams on the front and the back to restrict for­ward and back­ward move­ment, while the side struts limit lat­eral motion.

The front and back strut are secured using steel T-brackets to dis­trib­ute pres­sure against the bar bet­ter and to ensure that for­ward or back­ward motion does not wiggle any of the screws free.

The top bar is set into the 4×4 and then secure on the top and on the back of the hori­zontal bar. A little work is left to be done, as I need to even out some of the insert with a wood filler and even out the front as well to make it look more uni­form. The four brack­ets are suf­fi­cient to keep the bar in place, at least with y strength.

The side struts are secure with brack­ets as they do not need to carry as much weight.

The tools I used are fairly simple. A couple of screws an angle cut­ter with a saw, a power drill and the metal braces and brack­ets you see in the pic­tures. One 4×4 and one 2×2 as men­tioned before.

Now that I am happy with the cross and under­stand bet­ter what I have had to do I will have to test run it again with my little slut. The next pro­ject I have decided to tackle is a fuck­box. Basic­ally a box which enables my slave to kneel over a toy or two toys which then get inser­ted into her lower fuck­holes. The plat­form will make sure that she has to stay in place. I will update you with my pro­gress as I move toward completion.

For now enjoy the cross and start build­ing you own.