I had promised an update on the BDSM cross and finally I have had a chance to finish it. I will let you look at some pictures first and then add some explanation.
As mentioned before I had to reinforce the cross to ensure that no motion will be transferred to the main bracket as my slave tries to wiggle or move in her predicament. I had to build the supporting beams myself as none of our hardware stores carried suitable 90º steel brackets.
A view of you walking around the cross, showing the main beams on the front and the back to restrict forward and backward movement, while the side struts limit lateral motion.
The front and back strut are secured using steel T-brackets to distribute pressure against the bar better and to ensure that forward or backward motion does not wiggle any of the screws free.
The top bar is set into the 4×4 and then secure on the top and on the back of the horizontal bar. A little work is left to be done, as I need to even out some of the insert with a wood filler and even out the front as well to make it look more uniform. The four brackets are sufficient to keep the bar in place, at least with y strength.
The side struts are secure with brackets as they do not need to carry as much weight.
The tools I used are fairly simple. A couple of screws an angle cutter with a saw, a power drill and the metal braces and brackets you see in the pictures. One 4×4 and one 2×2 as mentioned before.
Now that I am happy with the cross and understand better what I have had to do I will have to test run it again with my little slut. The next project I have decided to tackle is a fuckbox. Basically a box which enables my slave to kneel over a toy or two toys which then get inserted into her lower fuckholes. The platform will make sure that she has to stay in place. I will update you with my progress as I move toward completion.
For now enjoy the cross and start building you own.